WorkFit-S, Single LD Workstation with Worksurface
Advanced ergonomics? You got it. The WorkFit-S is our best solution for flexible and comfortable working. This height-adjustable standing desk easily attaches to your desktop and adds a worksurface that stays with you as you sit or stand. Just lift or lower the WorkFit-S and tweak the optional weight settings for no-sweat adjustment. Then individually fine-tune your single monitor mount and keyboard tray for how you work best.
Brand
Deskripsi
Advanced ergonomics? You got it. The WorkFit-S is our best solution for flexible and comfortable working. This height-adjustable standing desk easily attaches to your desktop and adds a worksurface that stays with you as you sit or stand. Just lift or lower the WorkFit-S and tweak the optional weight settings for no-sweat adjustment. Then individually fine-tune your single monitor mount and keyboard tray for how you work best.
Fitur
Manfaat
- Bestselling design
Our most comfortable, ergonomic solution - Versatile converter
Transforms any surface into an adjustable standing desk - Smooth adjustment
Full workstation moves easily up and down - Front surface-mount
Fits desks flush against walls or shallow surfaces - Keyboard tray
Ergonomic, drop-down position includes two tilt options - Personalized views
Rotate screens 360° to match your workflow
Spesifikasi
| Part Number | 33-350-200, 33-350-211 |
| Description | WorkFit-S Sit-Stand Workstation for Dual Displays, with Worksurface and Large Keyboard Tray. Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface, large keyboard tray. * Maximum outside width of display is 24.5″ (62 cm) when display is 2″ (5 cm) thick. Accommodates most displays with screen-size up to 24″ as well as some displays with screens as large as 26″. Actual allowable width of displays will vary slightly depending on display thickness. Note that older versions of this product used a narrower crossbar, which accommodated monitors with screens up to 22″. Install displays at 3° or 8° upward angle for optimized viewing conditions. Desk Clamp attaches to surface edge .47″ to 2.4″ (1.2 to 6 cm) thick. Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivityKeyboard tray can be installed in nine potential locations relative to the monitor: centered or off-set to left or right; at standard focal distance or 2.2″ (5.6 cm) or 4.4″ (11.2 cm) farther awayWorksurface Dimensions: 0.25″H x 23″W x 15″D (6 x 585 x 380 mm)Keyboard Tray Dimensions: 0.25″H x 27″W x 9″D (6 x 685 x 226 mm)Durable, easy-to-clean exterior composed of aluminium, high-grade plastic and powder coated painted steel. This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds). |
| NOTE | Extra-long cables may be required to span between standing and sitting heights. Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment. |
| Weight Capacity | Maximum total load on height-adjustment assembly = 25 lbs (11.4 kg). LCD weight = 6–12 lbs (2.7–5.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 25 lbs (11.4 kg). |
| Mounting Standards | VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm). |
| Lift Range | LCD and keyboard adjust 18″ (46 cm) in tandem; LCD adjusts 4.8″ (12.2 cm) independently; maximum LCD height adjustment = 22.8″ (58 cm). The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5″ (13 cm). |
| Shipping Dimensions | 8″H x 23″W x 44″D (20 x 58 x 115 cm). |
| Shipping Weight | 44 lbs (20 kg). |
| Warranty | Five (5) years. |
