Dual Monitor & Handle Kit
Convert a single-monitor mount so it holds two displays, or increase the size of compatible displays for your current dual-monitor solution. A handle is included to make repositioning of the screens easy.
NOTE: Adding this accessory to your mount or workstation will reduce its listed weight capacity by 6 lbs (2.7 kg). See Tech Specs for details.
PART NUMBER: 97-783
Brand
Deskripsi
Convert a single-monitor mount so it holds two displays, or increase the size of compatible displays for your current dual-monitor solution. A handle is included to make repositioning of the screens easy.
NOTE: Adding this accessory to your mount or workstation will reduce its listed weight capacity by 6 lbs (2.7 kg). See Tech Specs for details.
PART NUMBER: 97-783
Fitur
Manfaat
- Perfect dual-mounting solution for monitors with screen sizes of 17″ to 24″
- Attaches to wide variety of mounts using a 50 x 50 mm or 100 x 100 mm hole pattern
- Robust design ensures many years of service
- Conceal and organize cables: Display cables can be neatly routed behind displays
Spesifikasi
| Part Number | 97-783 |
| Description | Dual Monitor & Handle Kit (black). Includes bow, two mounting brackets, handle, mounting hardware. Outside width of monitor should be 14″ to 24.5″ (35 to 62 cm). This range accommodates most 17″ to 24″ displays as well as some displays as large as 26″. If the outside width is less than 14″ (35 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5″ (62 cm) are not compatible. This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5″ (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5″ (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity. Combined weight of displays can be no more than 36 lbs (16.4 kg)—in no circumstances should displays exceed this weight. Attaches to mounts with four-hole interface of 50 x 50 mm or 100 x 100 mm. This kit can be installed and used without the included handle. |
| Mounting Standards | VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) |
| Product Dimensions | 4″H x 29.1″W x 1.5″D (10 x 74 x 38 cm). |
| Shipping Dimensions | 31″ x 13.5″ x 7″ (79 x 34 x 17.5 cm). |
| Shipping Weight | 8.4 lbs (3.8 kg). |
| Warranty | Five years. |
